page1
The Overview to Retrofit Bi Xenon Projector Housing in CCAG CS75
- In a lot of time, numerous cars and truck tuning fanatics upgrade their factory halogen lights into HID light bulb. However it is a little trouble. Installing a HID bulb, it ought to match the projector and the ballast.
- While some people will certainly believe it is a frustrating. They certainly like to upgrade the headlight housing. One of our clients do that, he drives his CS75 for about 10,000 kilometers.
- The new housing DRL, Hella bi xenon projector for low beam, Iwasaki D2H HID light bulb, BMC reflector for high beam of light, H1 halogen bulb and also Aozoom ballast. He went to our shop to end up the modification.
The mount actions were quite easy, it did not require a lot of work on the projector xenon and test light beam pattern. The entire accessories were all mounted in the housing. Just take apart the OEM housing and put the new one in it.
Open up the bumper and take off the housing. After completing the setup, the light examination is essential. It did not install a projector as well as light bulb, check if the lights are functioning correctly.
All points are done, place the light in the car and adjust the light beam pattern once again.
All points are done, place the light in the car and adjust the light beam pattern once again.
In particular, in the evening driving needs a secure lighting guarantee, of course, the height and thus illumination of the light need to be within a reasonable variety.
Do not adjust the height of low beam too expensive, although you are driving with low beam, the SUV model is expensive. The low beam will certainly be further, that would affect the safety and security of contrary driving.
Do not adjust the height of low beam too expensive, although you are driving with low beam, the SUV model is expensive. The low beam will certainly be further, that would affect the safety and security of contrary driving.